Thermo Transfer, Inc. - Exothermic Gas Generators
Thermo Transfer, Inc. | Manufacturer of Heat Processing Equipment
All Categories > Atmosphere Generators > Exothermic Gas Generators > View Items 
    Download PDF Download PDF     Email Email This Page     Save To Favorites Save To Favorites

Exothermic Gas Generators

 
Check up to five results to perform an action.

Atmosphere Generator (1)

larger image 		Thermo Transfer manufactures a complete line of endothermic, exothermic, nitrogen (molecular sieve) and dissociated ammonia gas generators. The endothermic gas generators can be gas or electric heated. The exothermic gas generator can be supplied with a boiler to produce steam as well as generated gas. Refrigeration and dryer systems are also available for the exothermic and ammonia dissociator gas generators.

Process:
Exothermic Gas is produced by burning a hydrocarbon fuel (natural gas, propane or butane) with air. The product gas is then cooled and condensate is removed through a trap.

Equipment:
An Exothermic Gas Generator consists of a refractory lined water cooled combustion chamber and has components to measure air and gas. A nozzle mixing burner, with cross-connected air-gas ratio, assures accurate ratio. The product gas is cooled in a shell and tube type heat exchanger. A cyclone type separator separates gas and large water droplets. The condensate is then removed though a trap.
All controls are centrally located within reach and at eye-level, permitting one person operation.

Features:
  • Five micron air filter.

  • Automatic air purge before start up.

  • Electrically ignited pilot system.

  • Continues flame detection.

  • Easy start-up without disturbing air-gas ratio.

  • Removable covers on combustion chamber, for easy access for maintenance.

  • Complete shut-down of system due to power, water, or fuel failure.

  • A diagnostic system.

  • Dust tight control enclosure.

  • Automatic turn-down up to 50% of capacity.

  • Unit completely tested prior to shipment.

  • Factory mutual approved components.

The table below represents the majority of product sizes produced, but not limited to, we are capable of building units from 1000 SCFH to 250,000 SCFH.
Each generator that Thermo Transfer builds comes equipped with an (8) eight point pre-startup and first out annunciator alarm system as a standard feature, which helps tremendously when troubleshooting your generator.

Thermo Transfer also manufactures car-bottom, tip-up, pusher, walking beam and hump back furnaces.
Use the "Request for Information" button to submit your inquiry for unit sizes not listed.


Request InformationCompare Items   Results per Page : 
  Results 1 - 9 of 9 1 

Capacity SCFH:

Dimensional Sizes Produced:

Motor HP:

Natural Gas
SCFH
(Rich / Lean):

Water @
85 Gal/Hr
(20 Deg Rise)

Weight Pounds:

1,000 10' 4" L x 4' 8" W x 5' 10" H 1.5 167 / 125 600 1,800
2,000 10' 4" L x 4' 8" W x 5' 10" H 2 334 / 250 1,200 2,800
4,000 10' 9" L x 5' 6" W x 6' 0" H 2 668 / 500 2,400 4,800
6,000 11' 3" L x 6' 0" W x 6' 0" H 3 1,000 / 750 3,600 6,000
8,000 12' 0" L x 6' 0" W x 6' 0" H 3 1,335 / 1,000 4,800 8,000
10,000 14' 6" L x 6' 5" W x 7' 0" H 5 1,670 / 1,250 6,000 9,000
15,000 16' 6" L x 7' 6" W x 7' 0" H 5 2,500 / 1,875 9,000 13,000
20,000 18' 2" L x 7' 6" W x 7' 0" H 10 3,340 / 2,500 12,000 20,000
30,000 19' 5" L x 7' 6" W x 7' 0" H 15 5,000 / 3,750 18,000 31,000
  Results 1 - 9 of 9 1 
Privacy Policy     Site Map     Site created by ThomasNet Web Solutions